Parameter Control And Analysis Of Camouflage Fabrics Against Infrared Rays.

May 09, 2024

 

1  control of infrared parameters
 

 

         Each color in the camouflage cloth has an infrared reflectivity parameter requirement within the range of 700~1200. Only by controlling the reflection curve of each color within the required range can it be difficult to be detected by infrared detectors at night and achieve a camouflage effect. When selecting materials for imitation samples, it must not only conform to the appearance color of the customer's sample, but also meet the requirements of the infrared reflectivity curve. Therefore, color matching should be based on the single-color reflectance curve of each Shilin dye.

 

Here are some examples:


        For example, when the concentration of dark green and Shilin Golden RK is 10 g/kg, the reflectivity is 78%~84% in the range of 700~1200 nm. When the Shilin Green HFFB concentration is 15 g/kg, its reflectivity is 14%~65% in the range of 700~1200 nm. When the above two materials are combined into dark green, the reflectivity is 35% to 70% in the range of 700~1200 nm.

 

       If the required parameter range still cannot be reached, an appropriate amount of paint black can be added. Carbon black has strong infrared absorption ability, which can greatly reduce reflectivity. Some anti-infrared orders add a certain amount of carbon black when weaving gray fabrics. Generally, the greater the concentration of a single dye, the lower the reflectivity. Disperse dyes have little effect on reflectance.

 

2  color light adjustment
 


        For polyester and cotton fabrics, when the shades are close to each other, the dosage of disperse dyes is generally adjusted to achieve the shades requested by customers. If it is pure cotton fabric, the color can only be adjusted by adjusting Shihlin dye. Care should be taken at this time to avoid affecting the infrared reflectivity parameters.

 

3  color fastness control
 


       Infrared camouflage cloth has relatively high requirements on soaping fastness. Generally, ISO standards reach level 4 or above. At this time, soaping should be strengthened, and soaping twice if necessary.

 

4  control of printing operations
 


       During normal production, the selection of the size of the magnetic rod, the size of the magnetic force, the vehicle speed, the viscosity of the color paste, the selection of the mesh, the level of the liquid level in the mesh and other factors must be consistent with the enlarged sample.

 

 

 

corhunter garment company has rich experience in making workwear products, especially camouflage clothing, and we can complete orders of all sizes. And for fashion products, I also have abundant resources to produce them. If there are customers with fashion needs, we can also provide good services.

Hb3dcb96971724befb2de13edb55d104c9