Three perspectives for selecting a tactical vest

Aug 19, 2025

Starting from the perspective of operations, here is an analysis of three thinking angles for selecting tactical vests.

Since we are not specialized in researching equipment, the focus is mainly on commonly issued and procured tactical vests, rather than elaborating on the history of tactical vest development.

1.Bulletproof Insert Plate

First and foremost, it must have bulletproof capability itself.

In the past, there was a kind of simple magazine vest, which the military used to call a bullet pouch or carrying equipment. It was just a layer of MOLLE fabric with several magazine pouches and accessory packs attached.

info-703-482

 

In actual combat, it is necessary to wear a separate bulletproof vest underneath. Some units also tend to attach satchels and canteens to it, making the whole setup very bulky, which is unfavorable for most operations.

However, if it is used merely as a simple magazine pouch without unnecessary accessory packs, it is similar to the use of a chest rig, which is certainly sufficient for carrying out simple plainclothes escort missions.

 

info-652-538

 

Second, other bulletproof layers.

Whether bulletproof layers for the sides and crotch are needed depends on the specific operation. The crotch can basically only be fitted with a layer of Kevlar, which is used to block shrapnel.

For example, European anti-terrorism military and police forces are accustomed to close-range heavy armor operations, which means using heavy full-protection tactical vests, and operating with steel helmets and bulletproof face masks.

 

info-887-557

 

However, most special forces operations prioritize flexibility and mobility. Moreover, most combat techniques emphasize engaging the enemy head-on. In such cases, lightweight tactical vests with front and rear steel plates can meet the needs of most operations.

This is especially true for overseas operations or missions requiring long-distance marching and infiltration. Operators already have to carry a large amount of combat equipment, and it would be quite challenging to trek through mountains and rivers while wearing a full set of heavy armor.

Finally, the issue of quality.

In inferior tactical vests, the fixing capability at the bottom of the bulletproof plate is often poor, making it prone to falling off during long marches. This requires special attention.

The most reliable solution is double-layer protection, such as adding an extra fixing strap at the bottom to ensure that the bulletproof plate does not fall off easily.

info-814-522

 

2.Degree of Modularity

First, MOLLE webbing.

As a basic requirement, there must be a complete MOLLE attachment system on both the front and rear.

Some tactical vests, in order to save fabric and reduce overall weight, omit MOLLE webbing on the back or even the front, or feature extensive cutouts for ventilation. Such vests can be used for simple conventional combat missions, but due to their weak attachment capabilities, they struggle to adapt to high-intensity, more specialized special operations.

 

info-571-400

 

MOLLE webbing is the foundation for all tactical attachments.

Personnel with different roles and specialties have their own specific needs. For example, EOD (Explosive Ordnance Disposal) personnel need to be equipped with additional detonators, explosive ordnance scissors, and breaching tool sets;

Scouts require special reconnaissance equipment, monitoring devices, etc. Combined with magazine storage and weapon carrying, they need to flexibly configure their tactical vests.

Second, the chest rig modules.

Most tactical vests come with three or four parallel rifle and pistol magazine pouches, which work fine in most cases.

However, for snipers or heavy weapons operators who carry different specifications of sniper magazines, machine gun drums, and ammunition boxes, these standard rifle magazine pouches become very useless.

They need to choose modules with a completely "clean" chest area, where they can attach their required magazine pouches to meet operational needs.

 

info-472-360

 

Third, the waist-side connection.

Generally speaking, three or more MOLLE connecting straps can meet most loading needs. For example, placing communication equipment at the side and rear, configuring additional magazines, or inserting bulletproof plates, etc.

There are also more lightweight vests with only one connecting strap, which makes it difficult to attach equipment to the sides.

Each type has its own advantages, and the specific choice is certainly based on actual needs.

 

info-628-534

 

Fourth, the back plate.

A MOLLE system on the back can actually meet most loading needs. For instance, it allows for attaching grenade accessory pouches, hanging a dagger upside down, carrying breaching tools, and directly connecting a MOLLE back plate, among other things.

However, if there are zippers on both sides, it becomes more convenient and secure to connect a tactical back plate, thereby enabling better carrying of required equipment.

 

info-915-576

 

3.Quick-release system

Quick-release buckles on both sides

Modern tactical vests can basically meet the needs of normal putting on and taking off; they can be opened and worn by simply pulling the Velcro.

A certain new type of tactical vest requires repeated sticking and pasting many times to put on. Although this wearing method has its own considerations, it is quite counter-intuitive on the whole.

Another obvious problem with the latter is that it cannot be equipped with a quick-release system.

Installing quick-release buckles on both sides of the waist to achieve quick putting on and taking off has certain tactical value.

When needing to enter extremely narrow spaces where the tactical vest cannot fit, it is necessary to take it off. Velcro, on one hand, makes too much noise, and on the other hand, is too slow; quick-release buckles can solve this problem.

In pursuit operations, wearing heavy body armor makes it impossible to move quickly, and light-equipment pursuit is needed. At this time, quick release becomes a tactical requirement.

 

info-623-504

 

Shoulder quick-release buckles

The combination of shoulder quick-release buckles and those on both sides enables instant detachment.

This requirement for instant detachment is aimed at more extreme situations.

For example, in VBSS (Visit, Board, Search, and Seizure) operations, if one is forced to jump into water and needs to escape quickly, it is necessary to instantly detach the body armor and swim away with light equipment.

Another example is when, during the evacuation from the line of fire, the tactical vest gets caught, and there is no time to check; one can only pull open the quick-release buckles to leave the line of fire rapidly.

 

info-1188-668

 

Finally, some thoughts:

When it comes to equipment, there has never been a fixed way of using it, nor is there a rigid rule that it must be used in a certain way.

Equipment is inanimate, but people are dynamic. Ultimately, it all comes down to how people utilize it.

Whether it's lightweight gear, heavy armor, or chest rig vests, each has its own applicable scenarios.

Actual combat is not like playing Wargame; there isn't such a thing as a "pecking order" (or disdain hierarchy) among equipment. The most fundamental consideration is whether it can help accomplish the mission.

Any equipment that enables us to handle unexpected situations, meets tactical needs, and allows us to see the mission through to the end is good equipment.