Preparation before washing and disinfecting WORKWEARs

May 02, 2022

Preparation before washing and disinfecting WORKWEARs

Customized WORKWEARs have become popular in major companies. At the same time, they have to face a problem, that is, what should be paid attention to when cleaning WORKWEARs, and whether they are all thrown into the washing machine like ordinary clothes. Of course not, today we are going to focus on the city and study how to sterilize the tooling before washing it.

The national standard for WORKWEARs is to test the performance indicators after 33 hours of continuous washing, which is grade A; after 16.5 hours of continuous washing, the test performance indicators meet the requirements, which is grade B; according to the procurement and use standards of clothing, grade A or B-level inspections are eliminated, and if conditions permit, it can also be considered to carry out monitoring and testing of dust emission and excessive filtering of clean WORKWEARs.

1. The newly sewn clean WORKWEARs should be washed and disinfected according to the nature of the customer's use before use. If the recycled clean WORKWEARs find oil stains, they should be carefully removed and then washed and disinfected;

2. Before washing, the anti-static performance of clothing should be tested; zippers, hook and loop fasteners and other accessories should be checked, and those that cannot meet the standard should be replaced or scrapped;

3. When washing, all the hook and loop fasteners, metal buckles, zippers, etc. on the garment should be fastened and pulled to reduce the friction of these sharp pieces on the garment fabric;

4. In order to remove water-soluble contaminants, wash with clean water, and then perform post-washing with distilled solvent to remove oily contaminants.