Were there only M35 helmets in the Wehrmacht during World War II? Actually, there were 6 types, and the last one was disliked by the Führer.
Jul 19, 2025
When it comes to the most iconic helmet of the German military during World War II in people's minds, it is the famous M35. Indeed, the M35 was not only the most handsome helmet of that era but also the most practical and avant - garde military helmet at that time. Most people think that the German military only had this one model? But in fact, the steel helmets equipped by the German military back then included 6 types. So, what exactly are these 6 types? This article will discuss these 6 types of helmets of the German military during World War II with you.
Type 1: M35 Helmet
When it comes to the standard - issue helmet of the German military during World War II, it's certain that the first thing most people think of is the famous M35. That's right, this model was a symbol of German soldiers during World War II, and it was also one of the most good - looking and practical military helmets of that era.

The M35 steel helmet was an improved model based on three German helmets from World War I: M16, M17, and M18. It is particularly similar in appearance to the M16. The picture above shows a World War I M16 helmet painted with camouflage.

The M35 was also the first helmet equipped by Germany after World War I. Compared with the old models of World War I, the size of the M35 was improved, and the sizes of the brim and outer brim were adjusted. Compared with the large size of the early M16, it looked more coordinated when worn on the head.

At the same time, the manufacturing process of the M35 was also better. The main body of the helmet was made by stamping a single piece of material with a machine, and there were no joints or welds. Therefore, the helmet itself was of excellent quality and could effectively resist shrapnel on the battlefield.

However, the M35 helmet was not the only standard-issue helmet of the German military during World War II. The army and the SS were only equipped with it from the 1930s to the early stages of World War II. When the war truly entered its mid-stage, the M35 was no longer the mainstay. Instead, most German soldiers in World War II wore the later derivatives of the M35, namely the M40 and M42 models.
Type 2: M40 Helmet
Entering the 1940s, with the outbreak of World War II, Germany needed more helmets to equip the combat units of the army, navy, and air force. However, in order to speed up production, save production costs and materials, and facilitate rapid equipping of troops, a new type of helmet that was more simplified and had lower production costs was developed based on the M35 steel helmet, which was the M40.

On the surface, the M40 is basically identical to the M35, but there are changes in some details. The biggest difference between the M40 and the M35 is that the originally specially treated ventilation hole kits were removed, and instead, two holes were directly drilled into it, with the surface treated. This was done to speed up the production process.

In addition, the M40 and M35 were produced using different molds, which made the M40 slightly smaller in size. The brim and outer brim were also significantly shortened. Moreover, due to the rush to speed up production, the produced M40 steel helmets were not properly treated, resulting in a surface that was rough with many granular imperfections.

After the M40 helmet was introduced, it was first massively equipped to the German Air Force. As production volume continued to increase, the Army and the SS later also began to be equipped with it. However, the Führer attached great importance to the image of the SS, so the M40 helmets worn by SS soldiers were all post-processed, with better craftsmanship than those of regular troops. The surface of these helmets was smooth without any granular imperfections.
Type 3: M42 Helmet
By the mid - stage of World War II, Germany continued to further simplify the production process and costs based on the M35 and M40 helmets. In 1942, the new M42 helmet came out.

Similarly, the M42 also inherited the basic contours of the M35 and M40. Its ventilation holes continued the drilled design of the M40, and its overall size was the same as that of the M40. However, its craftsmanship was even simpler. The edges of the M35 and M40 helmets featured a curled edge process, while the M42, in order to further accelerate production, had edges that were directly left as flash without any treatment. The material of the M42 helmet was also thinner than that of the early M35, and the workmanship of the inner lining was reduced. Especially for the M42 helmets produced near the end of World War II, the leather inner lining was even replaced with hanging ropes and cloth.

However, precisely because of its low production cost and material-saving features, the M42 helmet was the most produced standard-issue helmet by Germany during World War II, far outnumbering the M35 and M40. During the war, it was widely equipped by the German Army and some SS combat units. Some of these helmets were even fitted with the M1943 camouflage helmet covers to enhance concealment.
Type 4: M38 Paratrooper Helmet
As we all know, the most elite unit of the German military during World War II was the airborne forces. The equipment and protective gear they were equipped with at that time were the best. However, paratroopers were not issued the M35 steel helmet; instead, they were given the M38 paratrooper steel helmet specially designed for them.

Before the M38, there were also two transitional models, the M36 and M37. Among them, the M36 was developed based on the M35 helmet, with the most notable feature being the removal of the side brims and the front brim, making it look like a brimless helmet overall. However, this model was not fully refined and had certain drawbacks in battlefield operations.

Later, the M37 paratrooper steel helmet was improved based on the M36. However, there was no significant change in its appearance. Only the four holes on the side of the helmet were reduced to two, and a ventilation hole was reserved in the middle of the helmet. Nevertheless, the M37 was not officially adopted by the German paratroopers either.

It was not until 1938 that the M38 paratrooper helmet, developed on the basis of the M37, was recognized by the paratrooper units after being tested in actual combat. This model eliminated the exposed strap holes, giving it a smooth and flat surface. It also inherited the overall shape of the M37, but the M38 was made of better materials and was lighter in weight, making it highly suitable for paratrooper operations. During World War II, the M38 paratrooper helmet also became a major symbol of the German airborne troops.
Type 5: Tropical Helmet
During World War II, as the German army deployed to the African theater, they were equipped with some new types of equipment tailored to the local environment, such as new combat uniforms, field caps, new military boots, and new helmets.

In particular, not all German soldiers were equipped with M40 or M42 helmets. Instead, they had tropical helmets specially designed for hot environments, which could also be called tropical sun helmets.

This type of helmet has a disc-like appearance with a brim all around, which can effectively protect against heat and sunlight. However, it is not made of metal materials but of wood or plant-based materials. Therefore, in terms of protective effect, it is far inferior to traditional metal steel helmets. Nevertheless, in the hot African battlefield, this kind of helmet was recognized by the soldiers.
Type 6: Type BⅡ/M45 Helmet
This was a steel helmet that was never adopted by the German military during World War II. It was originally a product secretly designed by German research institutes in private during World War II, without the knowledge of the Führer and some high-ranking officials. The purpose of doing so was to develop an excellent steel helmet to surprise the Führer and other leaders.

During the development process, four models emerged: Type A, Type B, Type BII, and Type C. After testing, only Type B and Type BII were retained, and they were internally named the M45 steel helmet by engineers.

In 1942, samples of this type of steel helmet were sent to the Army Ordnance Department for testing. The results showed that it was superior to the traditional M35 and M40 series in both material quality and protective performance. However, the Führer was furious about the secret development of the helmet behind his back. Moreover, he thought the helmet was ugly, as its shape resembled a pot, which, in his eyes, would damage the image of the German military. Therefore, he directly rejected it, prohibited all production and deployment, and "banished" this essentially excellent helmet to obscurity.

Later, with Germany's defeat in the war, it was divided into East Germany and West Germany. By the mid-1950s, as the Cold War intensified, both East and West Germany established new armed forces. Among them, the National People's Army of East Germany reactivated the M45 helmet that had been "banished to obscurity" back then, but it was renamed the M56 helmet.
That's all for this article. Do you have any different thoughts on these 6 types of helmets used by the German military during World War II? Please share them in the comment section. If you want to learn more, remember to follow us, and we'll continue to update in the next issue.








